Construction, the loader should be more safe operation, the following is a detailed introduction to the. Loader safety operation can be divided into the following five steps.

Check under the first machine

1, succession, the driver must according to the provisions and requirements of strict carefully check the equipment, such as the discovery of anomaly and the problem should be promptly report, and make a record.

2, check railings, ladders, support plate, a protective cover and the external surface of the device shell with and without deformation, cracks, welding and collision, a lamp and a frame is intact.

3, check the various parts of the pin and sleeve, screw loosening, wear, channeling, damage and loss. Two pin four pin and the bucket rod bucket arm is short of oil.

4, check the tire without cut and crack, pressure is normal, tire pressure ring and a pressure ring lock is normal, cover tyre fixing screw and the end whether the loosening of screws, inflatable valve cap is lost.

5, check the bucket without open welding, wear braces, iron etc. are complete, whether serious wear.

6, check the front and rear differential, final drive, wheel brake, hydraulic system, gear box, after the cooling device and the various parts of the pipe, water pipe leakage phenomenon.

7, the hydraulic oil and the table to check the hydraulic pump drive lubrication oil.

8, check the pressure gauge, such as pressure is less than 90Psi can not start the engine.

Second checks on the machine

1, check the steering and brake hydraulic oil level and brake cooling hydraulic oil surface and oil (oil quality is judged by the naked eye observation, mainly to see the color, if black, oily, need to be replaced).

2, check the engine lubrication system, cooling system and the body with no leakage phenomenon.

3, check whether the dust of the engine filter.

4, check the roll cage with open welding, crack and screw loosening.

5, check the transmission oil level and oil.

6, check the car mirror, window glass with no damage